Product Introduction:
2CY, KCB gear type oil pump:
1, the pump is suitable for conveying a variety of lubricating liquid, the temperature is not higher than 70℃, such
as the need for high temperature 200℃, contact with the unit can be equipped with high temperature resistant
material, viscosity is 5×10-5 ~ 1.5×10-3m2/s.
2, the pump is not suitable for conveying corrosive, containing hard particles or fibers, highly volatile or low flash
point liquid, such as gasoline, stupid, etc.
Meaning of Type
Structural Drawing
Operational Principle Drawing
Performance Curve
Performance Parameter
| Model | Flow | Discharge pressure | Bore | Power |
|
| L/min | m3/h | MPa | mm | Kw |
|
| KCB-18.3 | 18.3 | 1.1 | 1.45 | 20 | 1.5 |
|
| 2CY-1.1/14.5-2 |
|
| KCB-33.3 | 33.3 | 2 | 1.45 | 20 | 2.2 |
|
| 2CY-2/14.5-2 |
|
| KCB-55 | 55 | 3.3 | 0.33 | 25 | 1.5 |
|
| 2CY-3.3/3.3-2 |
|
| KCB-55 | 55 | 3.3 | 0.5 | 25 | 2.2 |
|
| 2CY-3.3/5-2 |
|
| KCB-83.5 | 83.3 | 5 | 0.33 | 40 | 2.2 |
|
| 2CY-5/3.3-2 |
|
| KCB-83.5 | 83.3 | 5 | 0.5 | 40 | 3 |
|
| 2CY-5/5-2 |
|
| KCB-133 | 133 | 8 | 0.33 | 50 | 4 |
|
| 2CY-8/3.3-2 |
|
| KCB-83.5 | 133 | 8 | 0.6 | 50 | 4 |
|
| 2CY-8/6-2 |
|
| KCB-200 | 200 | 12 | 0.13 | 50 | 4 |
|
| 2CY-12/1.3-2 |
|
| KCB-200 | 200 | 12 | 0.33 | 50 | 5.5 |
|
| 2CY-12/3.3-2 |
|
| KCB-200 | 200 | 12 | 0.6 | 50 | 5.5 |
|
| 2CY-12/6-2 |
|
| KCB-200 | 200 | 12 | 1 | 50 | 7.5 |
|
| 2CY-18/10-2 |
|
| KCB-300 | 300 | 18 | 0.36 | 70 | 5.5 |
|
| 2CY-18/3.6-2 |
|
| KCB-300 | 300 | 18 | 0.6 | 70 | 7.5 |
|
| 2CY-18/6-2 |
|
| KCB-483.3 | 483.3 | 29 | 0.36 | 70 | 7.5 |
|
| 2CY-29/3.6-2 |
|
| KCB-483.3 | 483.3 | 29 | 1 | 70 | 11 |
|
| 2CY-29/10-2 |
|
| KCB-633 | 633 | 38 | 0.28 | 100 | 11 |
|
| 2CY-38/2.8-2 |
|
| KCB-633 | 633 | 38 | 0.8 | 100 | 22 |
|
| 2CY-38/8-2 |
|
| KCB-960 | 960 | 60 | 0.3 | 100 | 18.5 |
|
| 2CY-60/3-2 |
|
| KCB-960 | 960 | 60 | 0.4 | 100 | 22 |
|
| 2CY-60/4-2 |
|
| KCB-960 | 960 | 60 | 0.6 | 100 | 30 |
|
| 2CY-60/6-2 |
|
Drawing of Setting Data
Table of Setting Data
