Feature Introduction
1 plunger diameter can be small, but should not be too large, - D= 3-200mm.
2. The discharge pressure range of the piston pump is wide, and it should be
made into a high pressure pump.
3 can transport high viscosity medium, not recommended for the transport of
corrosive slurry and dangerous chemicals.
Pereformance Parameter
Model | Bore (mm) | Flow (L/h) | Route (mm) | Power (Kw) | Speed (r/min) | Pressure （Mpa） | Plunger Dia （mm） | Weight (kg) |
|
J5.0-¨/50 |
8
| 7.5 |
32 | 1.5 |
102 | 50 |
8 |
135 |
J5.0-¨/40 | 7.5 | 0.75 | 40 |
J5.0-¨/50 | 9.5 | 1.5 | 50 |
J5.0-¨/32 | 9.5 | 0.75 | 32 |
J5.0-¨/50 | 12 | 1.5 | 50 |
J5.0-¨/32 | 12 | 0.75 | 32 |
J5.0-¨/50 | 15 | 1.5 | 50 |
J5.0-¨/25 | 15 | 0.75 | 25 |
J5.0-¨/40 | 19 | 1.5 | 40 |
J5.0-¨/20 | 19 | 0.75 | 20 |
J5.0-¨/32 | 24 | 1.5 | 32 |
J5.0-¨/16 |
15
| 24 | 0.75 | 18 |
J5.0-¨/25 | 32 | 1.5 | 25 |
J5.0-¨/12.5 | 32 | 0.75 | 12.5 |
J5.0-¨/20 | 40 | 1.5 | 20 |
J5.0-¨/10 | 40 | 0.75 | 10 |
J5.0-¨/16 | 50 | 1.5 | 10 |
15 |
J5.0-¨/8 | 50 | 0.75 | 5 |
J5.0-¨/12.5 | 63 | 1.5 | 12.5 |
J5.0-¨/6.3 | 63 | 0.75 | 6.3 |
J5.0-¨/10 |
20
| 80 | 1.5 | 10 |
25 |
J5.0-¨/5 | 80 | 0.75 | 5 |
J.50-¨/8 | 100 | 1.5 | 8 |
J5.0-¨/4 | 100 | 0.75 | 4 |
J5.0-¨/6.3 | 125 | 1.5 |
120 | 6.3 |
J5.0-¨/3.2 | 125 | 0.75 | 3.2 |
J5.0-¨/5 | 160 | 1.5 | 5 |
J5.0-¨/2.5 | 160 | 0.75 | 2.5 |
J5.0-¨/4 | 200 | 1.5 | 4 |
20 |
J5.0-¨/2.0 | 200 | 0.75 | 2 |
J5.0-¨/3.2 | 250 | 1.5 | 3.2 |
J5.0-¨/1.6 | 250 | 0.75 | 1.6 |
J5.0-¨/2.5 | 320 | 1.5 | 2.5 |
J5.0-¨/1.3 | 320 | 0.75 | 1.3 |
J5.0-¨/2 | 400 | 1.5 | 2 |
J5.0-¨/1 | 400 | 0.75 | 1 |
J5.0-¨/1.6 |
25
| 500 | 1.5 | 1.6 |
25 |
J5.0-¨/0.8 | 500 | 0.75 | 0.8 |
J5.0-¨/1.3 | 630 | 1.5 | 1.3 |
J5.0-¨/0.63 | 630 | 0.75 | 0.63 |
J5.0-¨/1 | 800 | 1.5 | 1 |
J5.0-¨/0.5 | 800 | 0.75 | 0.5 |
J5.0-¨/0.8 | 1000 | 1.5 | 0.8 |
J5.0-¨/0.4 | 1000 | 0.75 | 0.4 |
J5.0-¨/0.63 | 1200 | 1.5 | 0.63 |
32 |
J5.0-¨/0.32 | 1200 | 0.75 | 0.32 |
J5.0-¨/0.5 | 1500 | 1.5 | 0.5 |
J5.0-¨/0.25 | 1500 | 0.75 | 0.25 |
Drawing of Setting Data
