Feature Introduction
1 plunger diameter can be small, but should not be too large, - D= 3-200mm.
2. The discharge pressure range of the piston pump is wide, and it should be
made into a high pressure pump.
3 can transport high viscosity medium, not recommended for the transport of
corrosiveslurry and dangerous chemicals.
Performance Parameter
Model | Flow (L/h) | Pressure (MPa) | Plunger Dia (mm) | Route (mm) | Speed （min-1） | Power (kw) | Bore (mm) |
|
J50-320/50 | 320 | 50 | 25 |
100 | 120 | 15 |
DN25 |
J50-380/50 | 380 | 50 | 144 | 18.5 |
J50-500/50 | 500 | 50 | 32 | 120 | 22 |
J50-600/50 | 600 | 50 | 144 | 30 |
J50-650/40 | 650 | 40 | 36 | 120 | 22 |
J50-800/40 | 800 | 40 |
40 | 120 | 30 |
J50-800/32 |
| 32 |
| 22 |
J50-1000/32 | 1000 | 32 | 144 | 30 |
J50-1000/25 |
| 25 |
| 22 |
J50-1250/25 | 1250 | 25 |
50 | 120 | 30 |
DN32 |
J50-1250/20 |
| 20 |
| 22 |
J50-1500/20 | 1500 | 20 | 144 | 30 |
J50-1500/16 |
| 16 |
| 22 |
J50-2000/16 | 2000 | 16 |
63 | 120 | 30 |
DN40 |
J50-2000/12.5 |
| 12.5 |
| 22 |
J50-2500/12.5 | 2500 | 12.5 | 144 | 30 |
J50-2500/10 |
| 10 |
| 22 |
J50-3200/10 | 3200 | 10 |
80 | 120 | 30 |
DN50 |
J50-3200/8 |
| 8 |
| 22 |
J50-4000/8 | 4000 | 8 | 144 | 30 |
J50-4000/6.3 |
| 6.3 |
| 22 |
J50-5000/6.3 | 5000 | 6.3 |
100 | 120 | 30 |
DN65 |
J50-5000/5 |
| 5 |
| 22 |
J50-6300/5 | 6300 | 5 | 144 | 30 |
J50-6300/4 |
| 4 |
| 22 |
J50-8000/4 | 8000 | 4 |
125 | 120 | 30 |
DN80 |
J50-8000/3.2 |
| 3.2 |
| 22 |
J50-10000/3.2 | 10000 | 3.2 | 144 | 30 |
J50-10000/2.5 |
| 2.5 |
| 22 |
J50-12000/3.2 | 12000 | 3.2 |
140 | 144 | 37 |
DN100 |
J50-12000/2.5 |
| 2.5 |
| 30 |
J50-12000/2 |
| 2 |
| 22 |
J50-16000/2.5 | 16000 | 2.5 |
160 | 144 | 37 |
J50-16000/2 |
| 2 |
| 30 |
J50-16000/1.5 |
| 1.5 |
| 22 |
J50-20000/2 | 20000 | 2 |
180 | 144 | 37 |
DN125 |
J50-20000/1.6 |
| 1.6 |
| 30 |
J50-20000/1.2 |
| 1.2 |
| 22 |
J50-25000/1.6 | 25000 | 1.6 |
200 | 144 | 37 |
J50-25000/1.3 |
| 1.3 |
| 30 |
J50-25000/1.1 |
| 1.1 |
| 22 |
Drawing of Setting Data
