Feature Introduction
1 plunger diameter can be small, but should not be too large, - D= 3-200mm.
2. The discharge pressure range of the piston pump is wide, and it should be
made into a high pressure pump.
3 can transport high viscosity medium, not recommended for the transport of
corrosive slurry and dangerous chemicals.
Performance Parameter
Model | Bore (mm) | Flow (L/h) | Route (mm) | Power (Kw) | Speed (r/min) | Pressure (Mpa) | Plunger Dia (mm) | Weight (kg) |
|
J3.0-/45 |
8 | 7 |
28
| 1.1 |
96
| 45 |
8 |
7.5 |
J3.0-/35 | 7 | 0.75 | 35 |
J3.0-/40 | 10 | 1.1 | 40 |
J3.0-/30 | 10 | 0.75 | 30 |
J3.0-/30 | 12 | 1.1 | 30 |
10
|
J3.0-/25 | 12 | 0.75 | 25 |
J3.0-/25 | 16 | 1.1 | 25 |
J3.0-/20 | 16 | 0.75 | 20 |
J3.0-/25 | 17 | 1.1 | 25 |
12 |
J3.0-/16 | 17 | 0.75 | 16 |
J3.0-/20 | 24 | 1.1 | 20 |
J3.0-12.5 |
15 | 24 | 0.75 | 12.5 |
J3.0-/15 | 30 | 1.1 | 15 |
16 |
J3.0-/10 | 30 | 0.75 | 10 |
J3.0-/10 | 42 | 1.1 | 10 |
J3.0-/6.3 | 42 | 0.75 | 6.3 |
J3.0-/9 | 45 | 1.1 | 9 |
20 |
J3.0-/6.3 | 45 | 0.75 | 6.3 |
J3.0-/6.3 | 70 | 1.1 | 6.3 |
J3.0-/4 | 70 | 0.75 | 4 |
J3.0-/6.3 |
20 | 72 | 1.1 | 6.3 |
J3.0-/4 | 72 | 0.75 | 4 |
25 |
J3.0-/4 | 110 | 1.1 | 4 |
J3.0-/2.5 | 110 | 0.75 | 2.5 |
J3.0-/3.2 | 120 | 1.1 |
140 | 3.2 |
32 |
J3.0-/2.5 | 120 | 0.75 | 2.5 |
J3.0-/2.5 | 175 | 1.1 | 2.5 |
J3.0-/1.6 | 175 | 0.75 | 1.6 |
J3.0-/2.2 | 190 | 1.1 | 2.2 |
J3.0-/1.6 | 190 | 0.75 | 1.6 |
40 |
J3.0-/1.6 | 275 | 1.1 | 1.6 |
J3.0-/1 | 275 | 0.75 | 1 |
J3.0-/1.6 | 240 | 1.1 | 1.6 |
45 |
J3.0-/1 | 240 | 0.75 | 1 |
J3.0-/1.3 | 350 | 1.1 | 1.3 |
J3.0-/0.8 | 350 | 0.75 | 0.8 |
J3.0-/1 | 25
| 420 | 1.1 | 1 | 50 |
J3.0-/0.63 | 420 | 0.75 | 0.63 | 50 |
Drawing of Setting Data
